• Material Properties
  • UPVC Pipe Dimensions
  • Pipes For Water Supply
  • Pipes for Soil, Waste, & Vent
  • Pipe for Underground Gravity Drainage & Sewage
  • Electrical & Telecommunication Cable Conduit
  • Electrical & Telecommunication Underground Ducts
  • UPVC Pipe to British Standards for Potable Water
  • Fabricated Drawn Radius Bends
  • Fabricated Couplings
  • Rigid PVC Pipe Dimensions Based on ASTM D1785 & D2665
  • Effect of Elevated Temperature on Rigid PVC Pipe
  • Rigid PVC Conduit
  • Rigid PVC Fabricated Elbows to NEMA TC 3
  • Rigid PVC Fabricated Bends to NEMA TC 9
  • Handling and Storage
  • Introduction
  • FlowGuard™ - The Right Product
  • Material Properties
  • Chemical Properties
  • Hot & Cold Water Systems - Dimensions
  • Effect of Elevated Temperature
  • Advantages of CPVC Pipe
  • Introduction
  • Material Designation
  • Polyethylene Material Properties
  • HDPE Pressure Pipes for Water Supply - Dimensions
  • HDPE Non Pressure Pipes - Dimensions
  • HDPE Sub-Duct with Pre-Installed Pull Rope Inside
  • Sub-Duct & Miniduct - Dimensions
  • Advantages of Polyethylene Pipes
  •  
    Visited By : 1060165 People
     
    Polyethylene Pipes » HDPE Non Pressure Pipes - Dimensions
     

     Polyethylene Pipes

    HDPE Non Pressure Pipes

    SAPPCO HDPE PE 80 Pipes For Soil and Waste Discharge Systems
    (Low and High Temperature)


    Table : 4

    Dimension based on DIN 1519-1 
    and ISO 8770

    Nominal
    Outside Diameter
    (mm)
    Nominal
    wall Thickness
    (mm)
    Nominal
    weight
    (Kg / m)
    Pipe class
    (Series)
    32
    3.0
    0.277
    S - 16
    40
    3.0
    0.357
    S - 16
    50
    3.0
    0.454
    S - 16
    63
    3.0
    0.580
    S - 16
    75
    3.0
    0.696
    S - 16
    90
    3.5
    0.978
    S - 12.5
    110
    4.2
    1.43
    S - 12.5
    125
    4.8
    1.84
    S - 12.5
    160
    6.2
    3.04
    S - 12.5
    200
    6.2
    3.84
    S - 16

    Note:     SAPPCO PE 80 Pipes are suitable for intermittent discharge of waste
                  Water  Up to 82º C.

    SAPPCO HDPE PE 80 Pipes For Drainage and Sewage

    Table : 5 -  Dimensions based on DIN 19537

    Nominal
    Outside Diameter
    (mm)
    Nominal
    Wall Thickness
    (mm)
    Nominal
    Weight
    (Kg / m)
    Pipe class
    (Series)
    110
    4.3
    1.46
    Series 3
    125
    4.9
    1.88
    Series 3
    140
    5.4
    2.32
    Series 3
    160
    6.2
    3.04
    Series 3
    200
    6.2
    3.84
    Series 2

     
     
    © Copyright 2012 - 2014 SAPPCO DAMMAM FACTORY. All rights reserved. Designed By : SAUDI SOFTECH
    For detail view of website. You must required internet explorer 8/10 with adobe flash player 10.3 Download IE 10 | Download Flash Player