• Material Properties
  • UPVC Pipe Dimensions
  • Pipes For Water Supply
  • Pipes for Soil, Waste, & Vent
  • Pipe for Underground Gravity Drainage & Sewage
  • Electrical & Telecommunication Cable Conduit
  • Electrical & Telecommunication Underground Ducts
  • UPVC Pipe to British Standards for Potable Water
  • Fabricated Drawn Radius Bends
  • Fabricated Couplings
  • Rigid PVC Pipe Dimensions Based on ASTM D1785 & D2665
  • Effect of Elevated Temperature on Rigid PVC Pipe
  • Rigid PVC Conduit
  • Rigid PVC Fabricated Elbows to NEMA TC 3
  • Rigid PVC Fabricated Bends to NEMA TC 9
  • Handling and Storage
  • Introduction
  • FlowGuard™ - The Right Product
  • Material Properties
  • Chemical Properties
  • Hot & Cold Water Systems - Dimensions
  • Effect of Elevated Temperature
  • Advantages of CPVC Pipe
  • Introduction
  • Material Designation
  • Polyethylene Material Properties
  • HDPE Pressure Pipes for Water Supply - Dimensions
  • HDPE Non Pressure Pipes - Dimensions
  • HDPE Sub-Duct with Pre-Installed Pull Rope Inside
  • Sub-Duct & Miniduct - Dimensions
  • Advantages of Polyethylene Pipes
  •  
    Visited By : 1081124 People
     
    Polyethylene Pipes » Sub-Duct & Miniduct - Dimensions
     

     
    POLYETHYLENE PIPES
    Sub-Duct & Miniduct Dimensions (Pre-Installed Pull Rope)

    Table : 6

    Dimensions Based on MOPTT MAT 2301 and DIN 8074

    Duct Type
    Nominal Outside
    Diameter (mm)
    Nominal Wall
    Thickness (mm)
    Nominal
    Weight (Kg / M)
    Sub-Duct
    32
    2.0
    0.196
    Mini Duct
    50
    2.9
    0.440

     Table : 7          Dimensions Based on DIN 8074  SDR 11

    Nominal Duct
    Size (mm)
    Nominal Outside
    Diameter (mm)
    Nominal Wall
    Thickness (mm)
    Nominal
    Weight (Kg / M)
    32
    32
    3.0
    0.279
    40
    40
    3.7
    0.430
    50
    50
    4.6
    0.666

     Table : 8        Dimensions Based on ASTM D 3035 SDR 11/F2160 SDR 11 

    Nominal Duct
    Size (Inch)
    Nominal Outside
    Diameter (mm)
    Nominal Wall
    Thickness (mm)
    Nominal
    Weight (Kg / M)
    1
    33.40
    3.05
    0.299
    1 ¼
    42.16
    3.84
    0.465
    48.26
    4.39
    0.610
    2
    60.33
    5.49
    0.952

    Notes:

    1. HDPE Duct with longitudinal (Ribbed) Groove Conduit, Please consult our   technical  Sales department.

    2. For HDPE Ducts to other standards or dimensions please consult out Technical Sales Department.

    3. For details material properties, please refer to our web site page for PE 80 & PE 100 pipes.

     
     
    © Copyright 2012 - 2014 SAPPCO DAMMAM FACTORY. All rights reserved. Designed By : SAUDI SOFTECH
    For detail view of website. You must required internet explorer 8/10 with adobe flash player 10.3 Download IE 10 | Download Flash Player