• Material Properties
  • UPVC Pipe Dimensions
  • Pipes For Water Supply
  • Pipes for Soil, Waste, & Vent
  • Pipe for Underground Gravity Drainage & Sewage
  • Electrical & Telecommunication Cable Conduit
  • Electrical & Telecommunication Underground Ducts
  • UPVC Pipe to British Standards for Potable Water
  • Fabricated Drawn Radius Bends
  • Fabricated Couplings
  • Rigid PVC Pipe Dimensions Based on ASTM D1785 & D2665
  • Effect of Elevated Temperature on Rigid PVC Pipe
  • Rigid PVC Conduit
  • Rigid PVC Fabricated Elbows to NEMA TC 3
  • Rigid PVC Fabricated Bends to NEMA TC 9
  • Handling and Storage
  • Introduction
  • FlowGuard™ - The Right Product
  • Material Properties
  • Chemical Properties
  • Hot & Cold Water Systems - Dimensions
  • Effect of Elevated Temperature
  • Advantages of CPVC Pipe
  • Introduction
  • Material Designation
  • Polyethylene Material Properties
  • HDPE Pressure Pipes for Water Supply - Dimensions
  • HDPE Non Pressure Pipes - Dimensions
  • HDPE Sub-Duct with Pre-Installed Pull Rope Inside
  • Sub-Duct & Miniduct - Dimensions
  • Advantages of Polyethylene Pipes
  •  
    Visited By : 1060200 People
     
    UPVC PIPES » UPVC Pipe Dimensions
     

    UPVC PIPES & FABRICATED FITTING

    FOR COLD WATER SUPPLY, IRRIGATION SYSTEM,  SANITARY SEWERS,  
    WASTE & VENT AND CABLE DUCTS & CONDUITS

    SAPPCO UPVC PIPE DIMENSIONS BASED ON SAS 14 and DIN 8062 

    Table : 1.2
     
    Nominal Outside Diameter(mm)
    Class 2
    4 Bar
    Class 3
    6 Bar
    Class 4
    10 Bar
    Class 5
    16 Bar
     
    Nominal Weight(Kg/m)
    Nominal Wall(mm)
    Nominal Weight(Kg/m)
    Nominal Wall(mm)
    Nominal Weight(Kg/m)
    Nominal Wall(mm)
    Nominal Weight(Kg/m)
    Nominal Wall(mm)
    16
    -
    -
    -
    -
    -
    -
    0.090
    1.2
    20
    -
    -
    -
    -
    -
    -
    0.137
    1.5
    25
    -
    -
    -
    -
    0.174
    1.5
    0.212
    1.9
    32
    -
    -
    -
    -
    0.264
    1.8
    0.342
    2.4
    40
    -
    -
    0.334
    1.8
    0.350
    1.9
    0.525
    3.0
    50
    -
    -
    0.422
    1.8
    0.552
    2.4
    0.809
    3.7
    63
    -
    -
    0.562
    1.9
    0.854
    3.0
    1.29
    4.7
    75
    0.642
    1.8
    0.782
    2.2
    1.22
    3.6
    1.82
    5.6
    90
    0.774
    1.8
    1.13
    2.7
    1.75
    4.3
    2.61
    6.7
    110
    1.16
    2.2
    1.64
    3.2
    2.61
    5.3
    3.90
    8.2
    125
    1.48
    2.5
    2.13
    3.7
    3.34
    6.0
    5.01
    9.3
    140
    1.84
    2.8
    2.65
    4.1
    4.18
    6.7
    6.27
    10.4
    160
    2.41
    3.2
    3.44
    4.7
    5.47
    7.7
    8.17
    11.9
    200
    3.70
    4.0
    5.37
    5.9
    8.51
    9.6
    12.8
    14.9
    225
    4.70
    4.5
    6.76
    6.6
    10.8
    10.8
    16.1
    16.7
    250
    5.65
    4.9
    8.31
    7.3
    13.2
    11.9
    19.9
    18.6
    280
    7.11
    5.5
    10.4
    8.2
    16.6
    13.4
    24.9
    20.8
    315
    9.02
    6.2
    13.1
    9.2
    20.9
    15.0
    31.5
    23.4
    355
    11.4
    7.0
    16.7
    10.4
    26.5
    16.9
    39.9
    26.3
    400
    14.5
    7.9
    21.1
    11.7
    33.7
    19.1
    50.8
    29.7
    450
    18.3
    8.9
    26.8
    13.2
    42.7
    21.5
    -
    -
    500
    22.4
    9.8
    32.9
    14.6
    52.6
    23.9
    -
    -
    560
    28.1
    11.0
    41.4
    16.4
    65.8
    26.7
    -
    -
    630
    35.1
    12.4
    52.2
    18.4
    83.2
    30.0
    -
    -
    Note : 1 - Pressure rating, in BAR, at 23° C as per ISO 161-1
              2 - Nominal outside diameters and nominal wall thickness are based on overall 
    services (design) Coefficient of C=2.5  
     
     
     
    © Copyright 2012 - 2014 SAPPCO DAMMAM FACTORY. All rights reserved. Designed By : SAUDI SOFTECH
    For detail view of website. You must required internet explorer 8/10 with adobe flash player 10.3 Download IE 10 | Download Flash Player